Accessories

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

- Exceptional friction reduction and anti-wear properties with greatly reduced friction in metal to metal applications

• For quick and simple parking or displaying of your bike • Durable and rigid design • Fits any model of bike with 26-inch wheels • Color: Silver 26

Prestacycle introduces the new Prestaflator Mini. A new tool for Bicycle tire inflation designed for quick and easy one-handed inflation of bicycle tires.

From family hikes and bike rides to Sunday soccer matches, our Kids Insulated Bottle keeps them refreshed and hydrated no matter the activity. Our Kids Insulated Polar Bottle helps athletes of all ages stay refreshed and hydrated throughout the day, no matter the activity. Just the right height and size for kid's bike cages, lunch boxes, and features indented finger grooves to make it easier for smaller hands to grip and hold. The bottle's bright and colorful kid-friendly designs include Tri-Layer™ Insulation to keep their liquids cool twice as long and an integrated Dash Handle™ for easy transport and carrying. An easy-to-drink sport cap makes for quick hydration - pull for a cool stream and push to lock for a spill-free seal. Full Features: - Kid-friendly Insulated liner keeps liquids cold while protecting graphics from drop after drop. Finger grooves make it easier for smaller hands to grip and hold. Just the right height and size for kid's bike cages, lunch boxes and school packs. - The integrated sports cap makes for quick hydration - pull for a cool stream and push to lock for a spill-free seal. - Polar Bottle is the original, 100% BPA-free insulated water bottle. The updated design features triple wall insulation, keeping your liquid cooler 2X longer. - Our bottles are designed with ultra-light materials and a unique grip groove, so you can hydrate with an easy squeeze. - The innovative Polar Bottle Sport Cap is two pieces - cap and valve - and easy to clean. Simply twist, pull, and wash. Plus, they're dishwasher safe. - Designed to fit your bike cage, backpack pocket, or cup holder, the Polar Bottle is your go-further refresher for effortless hydration. - Polar Bottle insulated water bottles are crafted in Colorado to reduce environmental impact and support local economies. Designed to last, each one of our water bottles comes with a lifetime guarantee.

- 100% BPA-free insulated water bottle. - The updated design features triple wall insulation, keeping your liquid cooler 2X longer. - Integrated sports cap makes for quick hydration–pull for a cool stream and push to lock for a spill-free seal. - The innovative Sport Cap is two pieces–cap and valve–and easy to clean. Simply twist, pull, and wash. Plus, they're dishwasher safe. - Dash Handle turns your bottle into the ultimate travel companion, and its convenient loop keeps hydration at your fingertips. - Crafted in Colorado to reduce environmental impact - Weight: 150 g / 5.3 oz - Capacity: 0.71 L / 24 fl oz

When speed matters, our Breakaway Insulated Bolt bottle delivers a burst of cool hydration quickly. Just grab, squeeze, and drink up without splatter. Engineered to keep liquids cool to the last drop. As cycling enthusiasts, we know a thing or two about power sprints, brutal hills, and relishing the downhill ride. We also know there's nothing better than taking a big swig of cold water, hours after it's poured. So, we built the Breakaway Insulated bottle for road warriors like us—those who sweat hard, hydrate harder, and demand replenishment. Your liquids will stay cool twice as long, thanks to the Tri-Layer insulation and radiant heat reflective technology. Plus, we've re-engineered it to lighten your ride while still delivering simple hydration. The compact and durable design fits most bike cages and includes a high-flow, self-sealing Surge Cap for spill-proof transport. - The Breakaway Surge valve maximizes flow rate and self-seals to eliminate spills and splatter. It's spill-proof when open, and pushes closed for leak-proof transport. - The original, 100% BPA-free insulated water bottle. The updated design features triple wall insulation, keeping your liquid cooler 2X longer. - Our bottles are designed with ultra-light materials and a unique grip groove, so you can hydrate with an easy squeeze. - Made for cyclists by cyclists, the Breakaway series fits securely in a variety of bottle cages. The updated Polar Bottle shape has a unique grip groove and wall design for effortless hydration. - The innovative Surge Cap is two pieces—cap and valve—and easy to clean. Simply twist, pull, and wash. Plus, they're dishwasher safe. - Polar Bottle insulated water bottles are crafted in Colorado to reduce environmental impact and support local economies. Designed to last, each one of our water bottles comes with a lifetime guarantee. - Capacity: 0.59 L / 20 fl oz - Dimensions: 9.0 x 2.75 in. - Material: LDPE, TPU Valve - Weight: 127 g / 4.5 oz

- Made from laser cut tool steel heat-treated for strength and lasting performance - New design features 24mm socket driver for use with Pedro's professional socket tools - 290mm length and ergonomic shape provide excellent leverage and comfort - Smaller lightweight design perfect for travel and the toolbox Pulling inspiration from our shop wrenches and using the same laser-cut tool steel construction, the Pro Travel Pedal Wrench makes quick work of tough pedals and now doubles as a socket driver for use with Pedro's professional socket tools. Features include a long 290mm length, cushioned plastic grip for control and comfort, heat-treated tool steel construction for strength and lasting performance, new 24mm socket driver, and a precision-cut 15mm wrench opening positioned at a 30 degree offset to improve mechanical advantage and wrench positioning. The smaller, lightweight, 215g design is perfect for travel and easy to fit in the toolbox.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Pin Spanners are designed for maximum usefulness and versatility at the best value. Tough high-carbon tool steel is used to ensure long life and the handles are vinyl coated for a great grip and color-coded for easy identification. The green-handled SPA-1 is used to turn the adjustable bottom-bracket cup found on most 3-piece cranksets.

Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool

The Park Tool Fold-Up Hex Wrench Set combines 4, 5 and 6mm hexes, a flat blade screwdriver and a T25 Torx compatible driver into one convenient fold-up tool. Its multi-position composite handle is comfortable, lightweight, slip-resistant, and 40% stronger than steel handles.

Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-9 is 6mm x 1mm for cantilever brakes and large fender bosses.

Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.

Three of the most common Torx compatible wrench sizes in our classic 3-way design. The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). TWS-3 FEATURES - T10, T25 and T30 Torx compatible set - Wrenches made from industrial tool steel, through hardened and tempered for long life

Park's Multi Tool is made of investment-cast tool steel, nickel plated for durability. It includes 3, 4, 5, 6 and 8mm Allen wrenches; 8, 9, and 10mm box wrenches; and a regular screwdriver. The tools are positioned for easy use, too.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.

Many new bikes do not include pedals. Park Tool's DP-2 Threaded Dummy Pedal easily threads into the drive side to take the place of a pedal when making adjustments during the assembly of these bikes. Use of the DP-2 is much quicker than using a pedal wrench to install and remove an actual pedal during assembly.

Now you can easily tackle any crank bolt with Park's Crank Wrench. It features a dual-sided head with a 14mm socket and 8mm Allen wrench on a long, vinyl-coated handle so you're sure to have the leverage necessary for the job.

Park's AWS-7 features a Y-shaped nylon handle with 4 and 5mm Allen wrenches and a T25 Torx wrench. This convenient 3-in-1 tool keeps commonly used wrenches together and offers an excellent grip as well.

The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.

Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

If you have a bike with disc brakes, you'll want Park's Rotor Truing Fork. It allows you to gently adjust bent and damaged disc-brake rotors. It's made from high-quality steel and features 2 laser-cut slots for precise adjustments and a vinyl handle for comfort and control.

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).

Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-2 has 1.3mm tips on bent nose blades for medium, internal snap rings. The tips of the RP-2 open from 22mm down to 2mm (center to center).

Park handles all of your screwdriver needs with their Shop Screwdriver Set that includes 3mm and 6mm regular, and #0 and #2 Phillips screwdrivers. They feature heat-treated chrome-vanadium tips and shafts for maximum durability plus dual-density grips for top control and comfort.

The CRS-15EXT includes a tube and fitting to extend any CRS-15 to work on fork steering tubes up to 425mm.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4T was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. The Tool Kaddie rotates for easy access and is molded from a durable composite material. - Bench Top Mount sits firmly on any flat surface - Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters - Generic slots and holders to hold a wide variety of tools and small parts - Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately) - Built-in receiver port for PTH-1 Paper Towel Holder (sold separately)

Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool Frame and Fork Taps cut easily and fit conventional tap handles.

Park's Home Mechanic Wheel Truing Stand allows extremely accurate and reliable wheel truing and even building at an economical price. It's constructed from heavy-gauge steel and works with most wheel sizes and hub widths. It can be bolted to a bench for additional stability.

"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"

Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Center mount version is compatible with almost any adult bicycle - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty

The shape of the white VGD Cage was inspired by the legendary brandy toting St. Bernard rescue dogs of the Swiss Alps. The black VGD was designed to represent another type of rescue dog: the everyday Black Lab mix who's waiting to steal your heart and be adopted at the local shelter. - PDW donates 10% of profits from the Very Good Dog (VGD) Cage to animal advocacy organizations that help very good dogs in need.

The Portland Design Works Fatty Object is the first CO2 inflator on the market designed specifically to inflate fat and plus-sized tires. Made of indestructible alloy, the Fatty Object fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. The Fatty Object comes with a 38g threaded CO2 cartridge a lightweight foam insulator sleeve that will fill a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi. - Precision-machined body - Fits Presta and Schrader values - 38g threaded CO2 cartridge which fills a 26x4.8 tire to 6-7psi or a 29x3.0 tire to 20-22psi - Inflator only height: 44 mm (1.75") - Inflator only weight: 40g (1.3 oz)  - Foam insulator sleeve length: 77mm (3") - Weight of inflator with cartridge: 80g (6.9 oz) - Instruction manual (PDF) - Lifetime PDWarranty

Weighing just 290 grams (including adapter), the fork pack offers approximately 4.1 liters of additional storage space for bike packing. With the help of the QLS adapter, this ultra-light bag with roll closure can be mounted on forks with eyelets or cage mounts intended for this purpose, as well as on forks without cage mounts, as long as the fork blades sport a constant diameter of 30mm to 42mm. - Ultralight, waterproof bag (single pocket) with roll closure - The Fork-Pack is primarily designed for attachment to bicycle forks, but it can be mounted on non-tapered vertical tubes with a consistent diameter, e.g. Kick Style Scooters - Abrasion-resistant, Cordura fabric - Allows additional luggage to be carried on bikes using the Quick-Lock S (QLS) adapter system - Adapter is compatible with forks with eyelets and tubes with constant diameter from 30mm to 42mm - The Quick-Lock S mounting bracket may be bolted directly to a fork with braze-on eyelets or attached to vertical tubes using the supplied band-clamps - Ultra-fast installation, with one click the bag snaps in to place - The removal is just as fast, simply move the release lever and pull the bag upwards - The robust Quick-Lock S mounting plate remains mounted to the bicycle - Low profile locking elements ensure snag-free use - Internal stiffener - Reflective ORTLIEB logo - Maximum load 3kg / 6.6lbs.

Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.

Meet the brand new, fantastic, feature packed Face Fender! Lightweight, discreet, and very effective, the Face Fender is a simple front mud guard for mountain bikes, made from 100% recycled plastic. SHIZZLE SHIELD - Integrated into the Face Fender is the Shizzle Shield, which, when folded toward the tyre, stops pretty much anything from being flung forward and hitting you in the mush. NO MORE ZIP-TIES - No more zip-ties! The fender is profiled to hold the Velcro fastener without needing zip-ties or anything else.

Muc-Off hand sanitizer is great to have around the shop for everyone to use. - Contains 80% alcohol - Bottled in an FDA Facility - World Health Organization recommended formula - Vegetarian Friendly - This is a water thin formula, not gel

The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger. - Dome Diameter: 43mm (1.7') - Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

The LTD Mirrycle Mirror quickly attaches to Bontrager Isozone handlebars using the supplied wrench. It has a convex mirror for a wide field of view to help you clearly see approaching traffic. And the mirror easily adjusts to your optimum viewing angle.

The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike

The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes

High visibility is a must for anyone who spends a lot of time riding on roads. Lezyne's Zecto Drive Max 250 rear light ensures you are well seen in from the rear, day or night. With eight total modes from long-lasting economy mode to the 250-lumen output Daytime Flash mode, you can tailor this light's output to suit your needs at any time. It's ultra-compatc design features durable composite matrix construction with a machined aluminum faceplate and a versatile 2-in-1 clip and strap mounting system. - Micro-USB rechargeable

CNC machined aluminum dispenser with brass internals. Trigger Valve Operation for easy and controlled inflation. Twin Chuck head threads on to Presta and Schrader valves. Neoprene sleeve insulates hand from cold during discharge. Compatible with threaded CO2 cartridges. Includes one 16g cartridge. - Weight: 26g - Aluminum, a strong, lightweight, and durable material, is used to make various precision CO2 inflator components - CNC machined aluminum parts for precise and durable construction - Press on/off valve operation functions like a trigger, providing easy and precise inflation - Lezyne's ABS Flex Hose threads directly onto the valve for a secure, airtight connection. Compatible with Presta, and Schrader valves