Other

The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.

Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.

Problem Solvers Universal Derailleur Hangers The Universal Hanger replaces the drive-side nut on the quick-release skewer so you can get the majority of your gear range back. A vital tool to bring along when touring. - Emergency, on-the-trail derailleur hanger replacement - Enables you to keep riding and use the majority of your gear range - Compatible with most rear-facing-horizontal and vertical dropouts - Replaces the drive-side nut on 5mm quick-release skewers - Anti-rotation feature ensures the derailleur stays in place during use - CNC-machined AL-6061 with steel hardware

The Problem Solvers Center Lock Adapter Kit allows riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - Not intended to be used with rotors over 180mm in diameter - Made of extruded, CNC-machined, and broached AL-6061-T6 - Designed for use with Center Lock hubs and 6-bolt disc brake rotors

The Problem Solvers Up-Cup is a nice aluminum cup to replace a damaged or broken plastic non-drive side bottom bracket cup in a Shimano UN54 square-taper bottom bracket.

The Problem Solvers Handlebar Accessory Mount comes in handy when you don't have enough room on your handlebars for mounting all your accessories. It fits onto all handlebars, holds tightly and gives you 80mm of width for mounting more of your essential devices where they're easy to see and use (photo).

The Problem Solvers Cable Doublers are made of light, durable machined and anodized aluminum and they are Teflon coated for a super-smooth cable pull every time. They come in two models. The first allows you to control two brakes with one lever. The second allows you to control one brake with two levers. Why? Well, there are myriad applications: tandems, cyclocross bikes, fixies, tricycles, recumbents, cycles for those with special needs, bike polo bicycles, those 4-person bikes you see on beach boulevards, and so on. You could even link both models of Cable Doublers together for the ultimate in redundancy!

Riser kits increase stack height to fit a wide range of riding styles for efficient positioning; compatible with ZBS Aerobars, T Plus Carbon Series Aerobars, T Plus Aluminum Series Aerobars, Supersonic Aerobars, Sonic Aerobars, and Subsonic Aerobars. - Multiple kits can be used to reach desired height up to 80mm rise - Raises armrest and extensions together to maintain a comfortable wrist position - Kit includes a pair of risers, bolts specific to riser size, and mounting hardware - Risers are compatible with J2, J3, and J4 Aerobar brackets - Clamp diameter: 31.8mm

Our new Sonic bracket has been designed as the successor to the J2, which has been a somewhat ignored part of our range. With this update it brings our new generation fit range to a wider range of price points, replacing the J2 bracket. The Ergo armrest has been created to offer both a huge upgrade in fit range as well as increased rider comfort with a supportive curve to cup the arms. Performance - The Sonic/Ergo is designed to present minimal frontal area to create as little aerodynamic drag as possible. The main purpose of an aerobar is, of course, to get the rider into a fast position. Despite a fairly minimalist appearance, the Sonic/Ergo offers a comprehensive fit range for exactly this purpose. Fit Data - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Width: 124mm to 290mm in 18.5mm steps (With Extensions at 100mm) - Armrest Stack: 60mm (no riser kit) to 130mm in 5mm increments (With aftermarket Riser Kit) - The extension length and rotation can be easily adjusted using the top bolt. There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1500 possible configurations. As a clip-on bar it is also possible to adjust the extension width and tilt easily. This is the most adjustable clip-on bar on the market (and in history). It is worth noting that our previous top level clip-on aerobar, the J4/F35, offered 90 possible configurations. This highlights the significant step forward we’ve made with our new generation aerobars in allowing riders to precisely adjust their position. Origin - After we released the Supersonic (J5) as a premium bracket with market-leading fit options and versatility, we wanted to bring the same kind of options to the rest of our range of brackets and thus aerobars. By simplifying the extension clamp and shifting the wing forward to the bar center line, we were able to meet our targets. As a consequence of the simplification the Sonic is the lightest of our current brackets. The Ergo armrest shares the flippable design of the rest of our new generation armrests. By swapping sides or rotating the armrests, smaller increments of movement are achieved – making it simple to fine-tune a rider's position or match the position from their previous aerobar or bike. Extensions - Extension Shape: A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The 35a is a straight 35° bend. - Bracket: Sonic - Clamp Diameter: 31.8mm (26.0 w/Shims) - Armrest: Ergo / 10mm Pads - Armrest Width: 124mm to 290mm in 18.5mm steps (with Extensions at 100mm) - Armrest Offset: -70mm to -2.5mm in 7.5mm steps - Armrest Stack: The minimum is 60mm and the bracket is compatible with our existing risers which add up to 130mm stack with (70mm of spacers added) - Weight: 559g

- Superlight CNC machined 6061 aluminum spacers for fine-tuning stem height - Includes one each 3, 5, 10mm spacers and two each 1mm spacers

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Flat Mount Disc Caliper Bracket Bolts

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

Need a hand-friendly quick-release with some major bling? Then Salsa's Flip-Lock Seat Clamps are just what you're waiting for! Regarded as some of the best out there by those in the know, these sweet seat collars are super tough, easy to use and come in a variety of colors to please your palette. - Machined 6061-AL with stainless steel pivot and bolt - Anodized with laser-etched logo - Integrated Flip-Off lever - 30.0 clamp for most Salsa steel frames - 30.6 clamp for most Salsa Scandium frames - For smooth operation, lightly grease the bolt threads and keep all parts clean

Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.

This is a rear derailleur mount link for Shimano's XTR M9000 rear derailleur. A straight link is essential to optimal shifting performance and reliability.

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Chrome allen seat binder bolt

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Replacement front cable hanger - Aluminum construction

Rated fully KICKASS by a very authoritative entity who will remain unnamed, Surly's cast and polished stainless steel clamps won't rust or chip paint because they can't (even the black ones!). They're shiny! They look good! And most importantly, they deliver the clampability seatposts crave.

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps. - Sold individually, includes bolt, washer and nut

Get back on the road with genuine replacement parts. - For optimal aerodynamic benefit - Choose flush cut or exposed steerer - Only compatible with the Madone Gen 7 barstem

Original equipment replacement seatpost clamps. - See spec chart for available diameters and compatibility - For specific compatibility concerns, please contact our Customer Service team

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Allows use of standard stem with your Domane. - Keeps a clean aesthetic - For specific compatibility concerns, please contact our Customer Service team

Get back on the trail with a quality replacement hanger. - Original equipment replacement rear derailleur hangers - Attachment hardware is sold separately Specifications: - Size: Rear drive side, 148x12mm Thru Axle - Mounting location: Rear drive side - Attachment: Thru axle nut

Replacement handlebar display unit specifically for your Townie GO! 7D bike. Product details: - 22.2mm handlebar mount - Compatible with Townie GO! 7D only